Physical & Chemical Indexes:
Appearance: Translucent emulsion
Solid Content: 34.0–36.0 %
Viscosity: 10–200 mPa·s
pH Value: 8.0–10.0
Melting Point (℃): 125–135
Viscosity (mPa·s): 10 (25℃) – 200 (5℃)
Active Content: 35%
Main Component: High-density polyethylene wax polymer
Ionic Property: Anionic
Performance Features:
Dramatically improve coating performance: After adding HQ-4196, the water resistance, scratch resistance, anti-blocking property and surface smoothness of coatings are greatly enhanced. Subject to different systems, no whitening or peeling occurs after 24 h room-temperature water immersion; pencil hardness increases by ≥1H; no continuous scratches after 50 cycles with 0000# steel wool under 500 g load.
Boost coating gloss: Effectively raises coating gloss for brighter film appearance. The 60° gloss value can be increased by 10–30 units (varies with systems).
High compatibility: Good miscibility with various water-based resins for easy blending.
Self-film-forming property: Capable of forming film at ambient temperature without extra film-forming agents.
Eco-friendly & safe: Free of APEO, NMP and DMEA; VOC of finished formulation can be controlled ≤5 g/L for safe application.
Packaging, Storage & Transportation:
Packed in 25 KG / 1000 KG plastic drums. The shelf life is 24 months from the production date when stored in unopened original containers at 5℃–40℃.
Note: All data and information above are for reference only and shall not constitute any legally binding warranty or representation of our company. All data are empirical results obtained from laboratory tests. Users shall independently confirm the optimal formula, production process and control standards to meet the consistency and quality requirements of your finished products.
