Physical & Chemical Indexes:
Appearance: Milky white liquid with bluish tint
Solid Content, wt%: 28 ± 1
pH Value: 7-9
Brookfield Viscosity (25℃), mPa·s: 3000-6000
Minimum Film Formation Temperature (MFFT), ℃: 0
Density (25℃): 1.05～1.08 g/mL
Particle Size Distribution: 0.10～0.15 µm
Ionic Character: Anionic
Performance Features:
Excellent resistance to water whitening: It effectively blocks water penetration under humid conditions to prevent whitening and keep the coating film clear and attractive.
Strong wet adhesion: It tightly adheres to moist substrates to form firm bonding between coating and base material and resist peeling.
Balanced matte degree and light transmittance: Low matte level delivers soft and natural surface gloss, while high light transmittance fully displays the color and texture of undercoats.
Outstanding stain resistance: It repels dust and contaminants to maintain a clean coating surface and lower cleaning & maintenance frequency.
Good low-temperature film-forming property and weather resistance: It forms intact and dense films even at low temperatures. Superior weatherability protects coatings against UV rays, wind and rain erosion to extend service life.
Excellent interface compatibility: It mixes well with multi-color coatings, real stone paint and other base coats to build stable, uniform coating systems without delamination or blistering.
Packaging, Storage & Transportation:
Packaging specification: 50 KG / 1000 KG per drum. Store in cool, dry and shaded areas at 5~40℃ with intact packaging. The shelf life is 12 months from the production date. Performance evaluation is recommended before use if the product exceeds shelf life. Protect the product fully from frost; once opened, use up all contents at a time.
Note: All data and information above are for reference only and shall not constitute any legally binding warranty or representation of our company. All data are empirical results obtained from laboratory tests. Users shall independently confirm the optimal formula, production process and control standards to meet the consistency and quality requirements of your finished products.
